Antique Pruning Saw Restoration - How To Make New Saw Teeth

This saw restoration was very challenging because I tried to keep as much of it as possible. The saw belongs to my father-in-law, and he says he has memories of this saw from the 60’s . As you can see, the saw is in a very bad condition. The blade is very rusty and has deep holes and the handle is simply destroyed. In this restoration I will show you how to restore the blade , no matter how destroyed it is and also how to make a new handle. So I started the restoration. I disassembled the handle from the blade, I cleaned the dirt before blasting it, after which I sandblasted the blade. For a deep cleaning I did an electrolysis of the blade. In this restoration process, the blade needed some repairs. I had to restore his teeth, I had to remove his sharp and irregular edges, I had to repair the holes through which the new rivets will enter. The blade had deep pits, for this reason I could not sand it and bring it to a smooth and glossy shape. And so that the blade would not be exposed to rust quickl