Kustorez

The client came to me on the recommendation of friends, he said that he needed help and was looking for someone to trim a long beech hedge that had grown quickly. When I arrived at the address, I saw a hedge about 45 m long and about 2 m high, the owners also asked me to trim the laurel that was growing in front of the hedge on the street side. I started trimming the hedge on the street side with a Stihl HSA100 trimmer (which I used only once), then moved on to trimming the laurel, but quickly realized that this trimmer was not at all convenient, and replaced it with a more familiar HSA86. As I continued to trim the hedge I moved between the laurel and beech and at one point I tripped and fell but quickly continued working as I entered the yard, I also decided to use the long trimmer KMA100 as it made the trimming much faster, after finishing trimming the sides I took the ladder and went back to the start and started trimming from the top, it was a bit awkward as I moved along the laurel as the branches were in the way and the ladder had to be positioned well. Once the job was finished I started clearing up and the first thing I did was just push everything from the side of the road with a pitchfork up to the trailer and then rake it up, inside the yard I had to pack everything into green 500 litre bags (for beech I mostly use 500 litre bags as even a full load weighs around 30kg but for other hedges I use 272L bags and a full bag of Thuja cuttings can weigh around 50kg). When I finished everything and was about to put the tools in the car, I decided to make a little surprise for the owners and trimmed a large topiary thuja, which was located near the entrance, the owners did not expect this and were pleasantly surprised and thought that I would take an additional fee for this, but I said that it was a gift from me. Unfortunately, due to my carelessness, I accidentally deleted the video before and after, since these files were on another memory card, but I think this will not upset my viewers too much, since the work process was completely saved. The whole work took me 4.5 hours and a full trailer!