V-Carve Inlays - Detailed How To

Let’s get up close and personal with inlay settings in V-Carve. Its an easy process if you know what all the settings control. My personal notes are below: Tools (affiliate links to amazon) 60 DEGREE V-BIT - 1/4“ SPIRAL COMPRESSION BIT - 1/8“ SPIRAL DOWNCUT BIT - 3/4“ RESAW BLADE FOR BANDSAW - For the Inlay (Plug)... 1. Mirror the vectors in your graphic so you have a mirror image. Set your “Start Depth“ to .1. This ensures you have .1“ of material that sits down into the pocket. 2. Set the “Flat Depth“ to .1“. The .1“ here adds to the .1“ of start depth, so the emboss will be .2“ deep. Since .1“ will go INTO the pocket. This will leave a .1“ gap between the pieces for the band saw to pass through after the glue up. On the CNC router... Carve the inlay (plug) normally starting with the V-bit (60 degree preferably) Pocket... 1. The v-carve is business as usual except, set the flat depth to .2 inches and