Hairy Gardening X-mas Tree - 3D printed Christmas item

STL- I am very interested in things that are only possible with FDM 3D printing. Examples include design without support, Vase mode, etc. That’s why we created many designs using this. Among the things that are only possible with FDM 3D printing, one that has not been tried yet is the Hairy style design using the Bridge function. This was shown at its best in Hairy lion. However, while the Hairy lion is a great design, I thought it was very wasteful to have the outer surrounding wall thrown away. So, I thought that if I developed this method further, it would be possible to create a design with less filament waste. This time, I came up with an idea to implement it, so I designed it. That’s the Hairy gardening christmas tree. The idea is to connect the leaves to the branches with a bridge. Since the branches act as a wall, you can use all the leaves by cutting them without throwing anything away. When cutting leaves, just cut through the middle of the leaf. However, leaves connected to the trunk should be cut as close as possible so that no leaves remain on the trunk. The long outer branches are inserted into the bottom hole of each trunk, and the inner short branches are inserted into the upper hole of the trunk. When you cut the leaves, the separate branches may look too hairy. You can cut the leaves of these branches into the desired shape with scissors to make them look more natural. You can cut the leaves naturally like this before inserting the branches into the trunk, or you can cut the leaves after inserting the branches to complete the tree. Please check the video for more details. We hope you have a Merry Christmas with this Christmas tree! Merry Christmas~ Largest part in printing, size= X 90mm, Y 90mm, Z 72mm, After full assembly size= X 74mm, Y 74mm, Z 220mm Total Build Time : 13h 32m / Plastic Weight : 55g