Build F-18 Super Hornet with Single EDF

Yet another Fighter jet, this time is F/A-18F the 2 seated Super Hornet, the wingspan is about 1 meter plus, with the flying weight about 1700 gram. It’s still using the same EDF as my previous jet, which is 70mm 12 blades FMS EDF. I use 6S battery by connecting two 3S 2200mAh Lipo batteries in series. Because F-18 has dual exhaust I have to make a bifurcated duct made form art card, the power is not too different from if without using split duct exhaust. I was planning to copy the CG from the FMS Super Hornet but when I examine it the FMS Super Hornet was not made in scale with the real plane, the shape of the wing is different from the real plane, maybe they use F-18 legacy hornet as a base and just modify the LERX and the air intake. So I have to calculate it manually. You can download the plans here : Join this channel to get access to perks: Specs : 1. Wingspan 1020m / 40 inch 2. Flying weight : 1700 grams/ 60 oz 3. Wing loading : 45.2 gram/dm2 - 14.8 oz/. 4. Wing cube loading : 7.4 5. Wing Area : dm2 / 582 . 6. CG : 5 cm / 2 inch from Wing Break Electronics for test (pusher prop) - DXW 3536 1200kv - Prop 10x6 (2 blades) - 50A ESC - Battery Lipo 4S 2200mah - 4 x 9 gram servos (micro servo) Electronics for test (EDF) - FMS 70mm 12 blades 6S EDF - 80A Predator ESC - Battery Lipo 3S 2200mah x2 (series connection) - 4 x 9 gram servos (micro servo) Transmitter - Jumper T16 BetaFPV Express LRS TX module - 10 ch BetaFPV Express LRS RX Materials : 1. 5mm Foamboard/ Depron/ Polyfoam 2. 10mm Carbon Tube/ Bamboo/ Wood Dowel 1 meter 3. Mica Plastic 4. hot glue, UHU glue, CA glue, PVA glue 5. Packing tapes