How To Make a Leather Shoulder Bag: Chugureti by Karlova Design - Leather Craft Pattern and Tutorial

Pattern here: Introductory discount 36% until April, 7! Dimensions: approx. 16“ x 11.5“ x 4“ My largest shoulder bag so far, it’s a comfortable satchel, briefcase, or computer bag, suitable for both men and women, it has 5 pockets and a lot of space inside. Thanks to its design it’s a head turner, but it isn’t difficult to make, if you follow the tutorial. What you are gonna need: Materials: For the back panel - the heavier the better, minimum 7-8 oz. Should be full grain to provide the maximum strength. For the bottom and straps - 6-7 oz, medium to stiff the front pocket gussets, flap backing and back pockets - 3-4 oz (3 is better to decrease the overall bag weight).For the flap and lateral gussets - oz soft to medium (you can use stiffer stuff but it will be harder to turn it right side out after stitching the sides). Hardware: 3 x 1” buckle 5 x 1” button studs (Sam Browne) 1 x 10” zipper Rivets Tools: Scissors, knife (paper knife or rotary cutter would also work). Stitching irons: my pattern is made for stitching irons (5 stitches per inch). If you have 5 mm irons print the pattern at 96.7%) Needles - according to your thread size, a pair of harness needles. My thread is 0.6 mm. 1” and 3/4“ bag punches (oblong). Hole punches. Rivet setter. Mallet. Buttonhole punch would be handy too. Join our Facebook group to share your works and see what other people are making. The group is the best place to be informed about new patterns and discounts: Video about how to print the patterns and solve common printing problems: