How to Make Super Simple RC Airplane With Handmade RC

I used 3 servos for this model. The model can take off and land from short distances. That’s why the nose wheel is fixed. A rudder is also not required on this model. Since there is no rudder, servo cost is reduced. And the flight weight is also slightly reduced. The model is structured as simply as possible. But it has a stable flight. It can also fly at low speeds. It is also suitable for beginners. 2212 1400 Brushless Motor: Propellers: (2-Blade 8x4) OR (3-Blade 7x4) 30A Brushless ESC: OR OR LiPo Battery 1300-2200mAh: 35-40mm wheel (3 pcs): Micro servos (3 pcs): OR Gold Connectors : Wheel stopper (3 pcs)(): Y extension cable: Adjustable Linkage stopper (3 pcs)( Easy Link): Pushrods: Canopy Hatch Lock: Fiber Strips Adhesive Tape (25mm): Fastener strip: M3x8mm screws: 5mm Kraft Foamboard (2 plate) Lipo Battery Charger: OR Hot melt Glue Gun: OR If you don’t want to use handmade RC: 4 or 6 channel radio control system: OR OR Some of the shops that sell Kraft Foam Board: +9742012 How to Make Remote Control (VIDEO): Thanks for watching. If you want to support, join this channel. DIAGRAMS and DETAILS: Technicial Specifications: Lenght: 86 cm ( inc) Wing span: 88 cm ( inc) Flight weight: About 419gr battery weight Center of gravity: 6.9 - 7cm from the front of the wing Required control system: Min. 3 channels, 3 micro servos Suitable battery: 1300-2200Mah Suitable motor: 2212 1400KV Brushless Motor Suitable propeller: 2-Blade 8x4 or 3-blade 7x4 Flight Time: Approximately 10-20 minutes Vbar: 0,701 My Web Site (KendinYap): All of my videos : Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos. #rcairplanes #modelairplane
Back to Top